Agilent Technologies Signal Analyzer N9030a - Manual (Page 1376)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Trace/Detector
Dependencies When Signal ID is on, this key is grayed out.
Preset TRACE1, TRACE2
Backwards Compatibility
Notes The copy and exchange operations menu in ESA and PSA is replaced with the more general
purpose Copy/Exchange menu. The remote commands are unaffected, as they were already
general.
The 2-DL->2 function in ESA and PSA (which was really a trace math function) has been
eliminated, because its use case was very rare.. It actually subtracted the dB-equivalent of the
dBm-expressed display line, regardless of the y axis unit. For example, if DL = +21.99 dBmV, it
subtracted –25.00 dB (i.e. add +25.00 dB) to trace 2. New, more useful functions are provided in
the new Trace, Math menu
Initial S/W Revision Prior to A.02.00
Remote Command :TRACe:EXCHange TRACE1 | TRACE2 | TRACE3 | TRACE4 | TRACE5 | TRACE6,
TRACE1 | TRACE2 | TRACE3 | TRACE4 | TRACE5 | TRACE6
:TRACe:EXCHange?
Example TRAC:EXCH TRACE1, TRACE2 Exchanges Trace 1 and Trace 2 and puts both traces in
Update=Off, Display=On.
Notes The TRACe:EXCHange command is of the form::TRACe:EXCHange
<trace_1>,<trace_2>
Preset TRACE1, TRACE2
Backwards Compatibility
Notes The copy and exchange operations menu in ESA and PSA is replaced with the more general
purpose Copy/Exchange menu. The remote commands are unaffected, as they were already
general.
Initial S/W Revision Prior to A.02.00
From Trace
Selects the trace to be copied to or exchanged with the To Trace
Key Path Trace/Detector, Copy/Exchange
Notes See “Copy/Exchange”.
Preset 1
Initial S/W Revision Prior to A.02.00
1376 Remote Language Compatibility Measurement Application Reference