Agilent Technologies Signal Analyzer N9030a - Manual (Page 208)

5 Legacy Command Descriptions
Command Descriptions
Command Descriptions
All supported commands are listed here, with descriptions and cross-references to similar
commands.
The information here does not provide a comprehensive guide to all 8566A/B, 8568A/B, 8560
Series commands. It gives brief descriptions of the supported commands, and highlights
important functional or behavioral differences that you should be aware of when transferring
existing 8566A/B, 8568A/B, 8560 Series code to your X-Series instrument. For a complete
description of the commands, refer to the 8566A/B, 8568A/B, 8560 Series Operating and
Programming Manual.
To avoid confusion between numbers and letters, all commands that incorporate numbers have
the number spelled out and placed in square brackets after the command. For example, the
command I1 is shown as ‘I1 [one]’ - that is, the capital letter ‘I’ followed by the number ‘1’, and
then the word ‘one’ in square brackets. The word in brackets does not form part of the command.
208 Remote Language Compatibility Measurement Application Reference