Agilent Technologies Signal Analyzer N9030a - Manual (Page 786)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Meas
Command n Return Value
13. Marker 3 value (x,y)
14. Marker 4 value (x,y)
15. Marker 5 value (x,y)
16. Marker 6 value (x,y)
17. Marker 7 value (x,y)
18. Marker 8 value (x,y)
19. Marker 9 value (x,y)
20. Marker 10 value (x,y)
21. Marker 11 value (x,y)
22. Marker 12 value (x,y)
not
specified
or n=1 This query returns Trace 1 data as a list of x,y pairs. The y-
values are in the current Y Axis Unit of the analyzer. The x-
axis values are the values of the trace, in the x-axis scale
units of the trace (Hz for frequency domain traces, seconds
for time domain traces).
When querying trace data, it is best if the analyzer is not
sweeping during the query. Therefore, it is good to be in
Single Sweep, or Update=Off when querying trace data
from the analyzer.
2 Returns Trace 2 data as a series of x,y pairs
3 Returns Trace 3 data as a series of x,y pairs
4 Returns Trace 4 data as a series of x,y pairs
5 Returns Trace 5 data as a series of x,y pairs
6 Returns Trace 6 data as a series of x,y pairs
7 &
above Future use
786 Remote Language Compatibility Measurement Application Reference