Agilent Technologies Signal Analyzer N9030a - Manual (Page 192)

4 List of Legacy Analyzer Commands
Alphanumeric List of all Legacy Commands with N9061A Support
Command Description 8566 8568
8560
Series Description
internal memory
LOG Log No No No
LOLIMOFF LO Limit Off No No N/A
LSPAN Last span N/A N/A N/A
M1 Turns off all markers Yes Yes Yes "M1 [one] (Marker Off)" on page 364
M2 Marker Normal Yes Yes Yes "M2 [two] (Marker Normal)" on page 365
M3 Marker Delta Yes Yes Yes "M3 [three] (Delta Marker)" on page 367
M4 Marker zoom Yes Yes N/A "M4 [four] (Marker Zoom)" on page 369
MA Returns the amplitude of
active marker Yes Yes Yes "MA (Marker Amplitude Output)" on page 371
MBIAS Mixer bias N/A N/A No
MBRD Processor memory block
read No No N/A
MBWR Processor memory block
write No No N/A
MC0 Turns off the marker
frequency counter N/A Yes N/A "MC0 [zero] (Marker Frequency Counter Off)"
on page 372
MC1 Turns on the marker
frequency counter N/A Yes N/A "MC1 [one] (Marker Frequency Counter On)"
on page 373
MDS Measurement data size Yes Yes N/A "MDS (Measurement Data Size)" on page 374
MDU Measurement data units No No N/A
MEAN Returns mean value of
trace in display units Yes Yes Yes "MEAN (Trace Mean)" on page 375
MEANPWR Mean power measurement N/A N/A Yes "MEANPWR (Mean Power measurement)"
on page 376
MEANTH Trace mean above
threshold N/A N/A N/A
MEAS Measurement status N/A N/A No "MEAS (Meas)" on page 377
MEASOFF Measurement off N/A N/A N/A
MEASURE Measure mode N/A N/A N/A
MEM Returns amount of memory
available No No No
MENU Menu N/A N/A No
192 Remote Language Compatibility Measurement Application Reference