Agilent Technologies Signal Analyzer N9030a User Manual
Page 812
6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Meas Setup
Amplitude
Lets you edit the Amplitude of the current row.
Key Path
Meas Setup, Limits, Edit
Notes
There is no value readback on the key
Min
–1000 dBm
Max
1000 dBm
Initial S/W Revision
A.02.00
Insert Point Below
Pressing this key inserts a point below the current point. The new point is a copy of the current
point. And becomes the current point The new point is not yet entered into the underlying table,
and the data in the row is displayed in light gray.
Key Path
Meas Setup, Limits, Edit
Initial S/W Revision
A.02.00
Delete Point
This is an immediate action key. It will immediately delete the currently-selected point, whether
or not that point is being edited, and select Navigate. The point following the currently-selected
point (or the point preceding if there is none) will be selected.
Key Path
Meas Setup, Limits, Edit
Initial S/W Revision
A.02.00
Copy from Limit
Copies an existing limit into the current limit, including all secondary parameters (Description,
Associated Trace, Type, Margin, Interpolation, Relative to CF/RL).
Key Path
Meas Setup, Limits, Edit
Remote Command
:CALCulate:LLINe[1]|2|...6:COPY LLINE1 | LLINE2 | LLINE3 | LLINE4 |
LLINE5 | LLINE6
Example
:CALC:LLINE2:COPY LLINE1 copies the data from line 1 into line 2.
Notes
Auto return to the Edit menu.
Initial S/W Revision
A.02.00
812
Remote Language Compatibility Measurement Application Reference