Agilent Technologies Signal Analyzer N9030a - Manual (Page 867)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Mode
Example INST:SEL ADEMOD
INST:NSEL 234
Initial S/W Revision Prior to A.02.00
TD-SCDMA with HSPA/8PSK
Selects the TD-SCDMA mode for general purpose measurements of signals following this standard.
There are several measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed
information. If it is not active, exit the Help feature (Esc key), select the mode, and re-access
Help.
Key Path Mode
Example INST:SEL TDSCDMA
INST:NSEL 211
Initial S/W Revision Prior to A.02.00
cdma2000
Selects the cdma2000 mode for general purpose measurements of signals following this standard.
There are several measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed
information. If it is not active, exit the Help feature (Esc key), select the mode, and re-access
Help.
Key Path Mode
Example INST:SEL CDMA2K
INST:NSEL 10
Initial S/W Revision Prior to A.02.00
1xEV-DO
Selects the 1xEV-DO mode for general purpose measurements of signals following this standard.
There are several measurements available in this mode.
Remote Language Compatibility Measurement Application Reference 867