Agilent Technologies Signal Analyzer N9030a - Manual (Page 757)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Marker Function
Sets the detector for measure at marker detector 1 to Off
Preset Peak
State Saved Saved in instrument state
Readback Text Detector name
Initial S/W Revision A.02.00
Detector 1
This menu lets you select the detector to be used for Detector 1, or turn Detector 1 off. This is a
1-of-N menu that shows the normal list of detectors, but with the “Auto” key replaced by “Off”.
Key Path Marker Function, Measure at Marker, Detectors
Remote Command See "Detectors" on page 755 .
Example :CALC:MAM:DET QPE
Sets the detector for measure at marker detector 1 to Quasi peak
:CALC:MAM:DET OFF
Sets the detector for measure at marker detector 1 to Off
Preset Peak
State Saved Saved in instrument state
Readback Text Detector name
Initial S/W Revision A.02.00
Detector 1
This menu lets you select the detector to be used for Detector 1, or turn Detector 1 off. This is a
1-of-N menu that shows the normal list of detectors, but with the “Auto” key replaced by “Off”.
Key Path Marker Function, Measure at Marker, Detectors
Remote Command See "Detectors" on page 755 .
Example :CALC:MAM:DET QPE
Sets the detector for measure at marker detector 1 to Quasi peak
:CALC:MAM:DET OFF
Sets the detector for measure at marker detector 1 to Off
Preset Peak
State Saved Saved in instrument state
Remote Language Compatibility Measurement Application Reference 757