Agilent Technologies Signal Analyzer N9030a - Manual (Page 1319)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
System
Remote Command :SYSTem:HELP:HEADers?
Example :SYST:HELP:HEAD?
Notes The output is an IEEE Block format with each command separated with the New-Line character
(hex 0x0A)
Initial S/W Revision Prior to A.02.00
SCPI Version Query (Remote Command Only)
Returns the SCPI version number with which the instrument complies. The SCPI industry
standard changes regularly. This command indicates the version used when the instrument SCPI
commands were defined.
Remote Command :SYSTem:VERSion?
Example :SYST:VERS?
Initial S/W Revision Prior to A.02.00
Date (Remote Command Only)
The recommended access to the Date, Time, and Time zone of the instrument is through the
Windows native control (Control Panel or accessing the Task Bar). You may also access this
information remotely, as shown in this command and Time (below).
Sets or queries the date in the instrument.
Mode All
Remote Command :SYSTem:DATE “<year>,<month>,<day>”
:SYSTem:DATE?
Example :SYST:DATE “2006,05,26”
Notes <year> is the four digit representation of year. (for example, 2006)
<month> is the two digit representation of year. (for example. 01 to 12)
<day> is the two digit representation of day. (for example, 01 to 28, 29, 30, or 31) depending on
the month and year
Unless the current account has Power User or Adminstrator privileges, an error will be generated
by this command and no action will be taken.
Initial S/W Revision Prior to A.02.00
Remote Language Compatibility Measurement Application Reference 1319