Agilent Technologies Signal Analyzer N9030a - Manual (Page 168)

3 Programming the Analyzer
STATus Subsystem
register.
Preset 32767
Min 0
Max 32767
Status
Bits/OPC
dependencies Sequential command
Initial S/W
Revision Prior to A.02.00
Questionable Power Register
The following commands and queries are available for this register:
"Questionable Power Condition" on page 168
"Questionable Power Enable" on page 169
"Questionable Power Event Query" on page 169
"Questionable Power Negative Transition" on page 170
"Questionable Power Positive Transition" on page 170
Questionable Power Condition
This query returns the decimal value of the sum of the bits in the Questionable Power Condition
register.
The data in this register is continuously updated and reflects the current conditions.
Mode All
Remote Command :STATus:QUEStionable:POWer:CONDition?
Example STAT:QUES:POW:COND?
Preset 0
Status Bits/OPC dependencies Sequential command
Initial S/W Revision Prior to A.02.00
168 Remote Language Compatibility Measurement Application Reference