Agilent Technologies Signal Analyzer N9030a User Manual
Page 1047
6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Save
•
RBW Filter BW: 3dB, 6dB, Noise, Impulse
•
Sweep Type: Swept, FFT
•
PreAmp State: On, Off
•
PreAmp Band: Low, Full
•
Trigger Source: Free, RFBurst, Video, Line, Periodic, Ext1, Ext2, TV
•
Trigger Slope: Positive, Negative
•
Phase Noise Optimization: Fast, Narrow, Wide
•
Swept IF Gain: Low, High
•
FFT If Gain: Autorange, Low, High
•
Input: RF, BBIQ
•
RF Calibrator: 50M, 400G, Comb, Off
•
Trace Type: ClearWrite, TraceAverage, MaxHold, MinHold
•
Detector: Normal, Average, Peak, NegPeak, Sample
•
Trace Math: Off, PowerDifference, PowerSum, LogOffset, LogDifference
•
Y Axis Unit: dBm, dBmV, dBmA, W, V, A, dBuV, dBuA, dBuV/m, dBuA/m, dBuV, dBpT, dBG,
dB
After the header, just before the trace data, a line with just the word DATA on it is inserted to flag
the start of the trace data.
The following file example shows the first lines of a Trace 1 file with X Axis Unit = Hz and Y Axis
Unit = dBuV, after importing into Excel (the second row contains the Title):
Trace
“AS/NZS 1044; Conducted
>1000 W, Motors, Average”
A.01.00
E4410A
526 EA3 B25 P26 PFR
1
Segment
0
Number of Points
1001
Sweep Time
0.066266667
Start Frequency
18827440
Stop Frequency
24463718
Remote Language Compatibility Measurement Application Reference
1047