Agilent Technologies Signal Analyzer N9030a - Manual (Page 872)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Mode
If you are using the Help feature, this mode must be currently active to access its detailed
information. If it is not active, exit the Help feature (Esc key), select the mode, and re-access
Help.
Key Path Mode
Example INST:SEL IDEN
INST:NSEL 103
Initial S/W Revision A.02.00
Remote Language Compatibility
The Remote Language Compatibility (RLC) mode provides remote command backwards
compatibility for the 8560 series of spectrum analyzers, known as legacy spectrum analyzers.
After changing into or out of this mode, allow a 1 second delay before sending any subsequent
commands.
If you are using the Help feature, this mode must be currently active to access its detailed
information. If it is not active, exit the Help feature (Esc key), select the mode, and re-access
Help.
Key Path Mode
Example INST:SEL RLC
Or
INST:NSEL 266
Initial S/W Revision Prior to A.02.00
89601 VSA
Selecting the 89601 VSA mode will start the 89600-Series VSA software application. The 89600 VSA
software is powerful, PC-based software, offering the industry's most sophisticated general
purpose and standards specific signal evaluation and troubleshooting tools for the R&D engineer.
Reach deeper into signals, gather more data on signal problems, and gain greater insight.
•
Over 30 general-purpose analog and digital demodulators ranging from 2FSK to 1024QAM
•
Standards specific modulation analysis including:
•
Cell: GSM, cdma2000, WCDMA, TD-SCDMA and more
•
Wireless networking: 802.11a/b/g, 802.11n, 802.16 WiMAX (fixed/mobile), UWB
872 Remote Language Compatibility Measurement Application Reference