Agilent Technologies Signal Analyzer N9030a User Manual
Page 1004
6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Save
default path for this type of file and remembers the last path you used to save this type of file.
There is no softkey for directly navigating to the Save In field but you can use left tab to get here
from the File/Folder List.
User specified paths are remembered when you leave and return to a Mode and are reset back to
the default using Restore Mode Defaults.
File Name
The File Name field is initially loaded with an automatically generated filename specific to the
appropriate Save Type. The automatically generated filename is guaranteed not to conflict with
any filename currently in the directory. You may replace or modify this filename using the File
Name key. See the
documentation for more on the automatic file
naming algorithm.
When you press the File Name key the analyzer displays the Alpha Editor. Use the knob to choose
the letter to add and the front-panel Enter key to add the letter to the file name. The BK character
moves you back and the FW character moves you forward in the filename. The Select key on the
front panel generates a space character. When you are done entering the filename press the Done
softkey. This returns back to the File Open dialog and menu, but does not cause the save to
occur.
Save As Type
This field shows the file suffix for the type of file you have selected to save. For example, if you
navigated here while saving State, "Mode state (*.state)" is in the field. If you navigated here from
saving Trace, ""Mode state (*.trace)" is in the field. If you navigated here while exporting a trace
data file, "Trace Data (*.csv)" is in the field. For some file types, there is more than one choice in
the dropdown, which you can select by using the up and down arrow keys and Enter.
Up One Level
This key corresponds to the icon of a folder with the up arrow that is in the tool bar of the dialog.
When pressed, it causes the file and folder list to navigate up one level in the directory structure.
The Backspace key does the same thing.
Create New Folder
This key corresponds to the icon of a folder with the "*" that is in the tool bar of the dialog. When
pressed, a new folder is created in the current directory with the name New Folder and you can
enter a new folder name using the Alpha Editor.
Cancel
This key corresponds to the Cancel selection in the dialog. It causes the current Save As request to
be cancelled. The ESC key does the same thing.
Key Path
Save, State
1004
Remote Language Compatibility Measurement Application Reference