Lenze i700 - Manual (Page 13)

Lenze · i700 servo inverter · Reference manual · DMS 1.5 EN · 03/2014 · TD05
13
1 About this documentation
1.1 Conventions used
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1.1 Conventions used
This documentation uses the following conventions to distinguish between different types of
information:
Type of information Writing Examples/notes
Spelling of numbers
Decimal separator
Point The decimal point is always used.
Example: 1234.56
Hexadecimal number 0x For hexadecimal numbers, the prefix "0x" is used.
Example: 0x60F4
Binary number 0b For binary numbers, the prefix "0b" is used.
Example: 0b00010111
Text
Version information
Blue text colour All information that only applies to a certain controller
software version or higher is identified accordingly in this
documentation.
Example: This function extension is available from software
version V3.0!
Program name » « The Lenze »PLC Designer« PC software...
Window italics The Message window ... / The Options dialog box...
Variable name Set bEnable to TRUE to...
Control element bold The OK button... / The Copy command... / The Properties
tab... / The Name input field...
Sequence of menu
commands
If the execution of a function requires several commands,
the individual commands are separated by an arrow: Select
File  Open to...
Shortcut <bold> Press <F1> to open the online help.
If a command requires a combination of keys, a "+" is placed
between the key symbols:
Use <Shift>+<ESC> to...
Program code
Courier
IF var1 < var2 THEN
a = a + 1
END IF Keyword
Courier bold
Hyperlink underlined Optically highlighted reference to another topic. In this
documentation it is activated by mouse-click.
Icons
Page reference
( 13) Optically highlighted reference to another page. In this
documentation it is activated by mouse-click.
Step-by-step instructions  Step-by-step instructions are indicated by a pictograph.