Lenze i700 - Manual (Page 281)

Lenze · i700 servo inverter · Reference manual · DMS 1.5 EN · 03/2014 · TD05
281
9 Diagnostics & error management
9.6 Diagnostics parameters
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
9.6 Diagnostics parameters
0x10F8 - ECAT DC: Current time
0x2D81 | 0x3581 - Counter: Operating time
0x2D82 | 0x3582 - motor: Actual voltage - Veff, phase-phase
Display of the time information the i700 servo inverter is currently using (time of the device if you will).

Real-time information (Distributed Clock)
Display area (min. value | unit | max. value) Initialisation
0 ns 2 64 -1
 Write access  CINH  OSC  P  RX  TX UNSIGNED_64
Sub. Name Lenze setting Data type
 1 Device: Operating time UNSIGNED_32
 2 Device: Power-on time UNSIGNED_32
Subindex 1: Device: Operating time
Display of the seconds the i700 servo inverter has been operated (device status "Operation enabled") so far.
Display area
(min. value | unit | max. value) Initialisation
0 s 4294967295
 Write access  CINH  OSC  P  RX  TX UNSIGNED_32
Subindex 2: Device: Power-on time
Display of the seconds the i700 servo inverter has been switched on so far.
Display area
(min. value | unit | max. value) Initialisation
0 s 4294967295
 Write access  CINH  OSC  P  RX  TX UNSIGNED_32
Display of the current motor voltage
Display area (min. value | unit | max. value) Initialisation
0.0 V 429496729.5 0.0 V
 Write access  CINH  OSC  P  RX  TX Scaling: 1/10 UNSIGNED_32