1 default mapping, Default mapping, 7cia402 device profile – Lenze i700 User Manual
Page 218
7
CiA402 device profile
7.10
Cyclic sync torque mode (cst)
218
Lenze · i700 servo inverter · Reference manual · DMS 1.5 EN · 03/2014 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7.10.1
Default mapping
The default mapping for "Cyclic synchronous torque mode" is defined in the following objects:
Date received from the controller (RPDO)
Data transmitted to the controller (TPDO)
Object
Name
Data type
Axis A
Axis B
RPDO-->Axis A/B: Cyclic sync torque mode (cst)
RECORD
Axis A/B-->TPDO: Cyclic sync torque mode (cst)
RECORD
Object
Name
Data type
Axis A
Axis B
Controlword
UNSIGNED_16
Lenze control word
UNSIGNED_16
Operating mode: Selection
INTEGER_8
Torque offset
INTEGER_16
Target torque
INTEGER_16
Speed limitation: Upper speed limit
INTEGER_32
Speed limitation: Lower speed limit
INTEGER_32
Object
Name
Data type
Axis A
Axis B
Statusword
UNSIGNED_16
Lenze status word
UNSIGNED_16
Modes of operation display
INTEGER_8
Error code
UNSIGNED_16
Velocity actual value
UNSIGNED_16
Torque actual value
INTEGER_16