0x6076 | 0x6876 - motor rated torque, 0x6076, 0x6876 – Lenze i700 User Manual
Page 84: 5motor control & motor settings
5
Motor control & motor settings
5.8
Setting the motor parameters for the servo control
84
Lenze · i700 servo inverter · Reference manual · DMS 1.5 EN · 03/2014 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
0x6076 | 0x6876 - Motor rated torque
The rated motor torque set here serves as a reference value for the following objects:
• 0x6071 | 0x6872 - Target torque
• 0x6072 | 0x6872 - Max. torque
• 0x6074 | 0x6874 - Torque demand
• 0x6077 | 0x6877 - Torque actual value
• 0x60B2 | 0x68B2 - Torque offset
• 0x60E0 | 0x68E0 - Positive torque limit value
• 0x60E1 | 0x68E1 - Negative torque limit value
• 0x2DD6 | 0x35D6 - Torque: Filter cascade
Setting range
(min. value | unit | max. value)
Lenze setting
0.001
Nm
1000.000 0.600 Nm
Write access CINH OSC P RX TX
Scaling: 1/1000
UNSIGNED_32