Lenze i700 - Manual (Page 266)

9 Diagnostics & error management
9.3 History buffer
266
Lenze · i700 servo inverter · Reference manual · DMS 1.5 EN · 03/2014 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Subindex 3: Latest acknowledged message
Subindex of the most recent message acknowledged by the EtherCAT master.
Setting range
(min. value | unit | max. value) Lenze setting
0 255 0
 Write access  CINH  OSC  P  RX  TX UNSIGNED_8
Subindex 4: New active message
TRUE if messages are pending that have not been acknowledged by the EtherCAT master yet.
Display area
(min. value | unit | max. value) Initialisation
0 255 0
 Write access  CINH  OSC  P  RX  TX UNSIGNED_8
Subindex 5: Control bits
Settings for the transmission and storage of the messages
Setting range
(min. value | unit | max. value)
Lenze setting
0 65535 0
 Write access  CINH  OSC  P  RX  TX UNSIGNED_16