Lenze i700 - Manual (Page 82)

5 Motor control & motor settings
5.8 Setting the motor parameters for the servo control
82
Lenze · i700 servo inverter · Reference manual · DMS 1.5 EN · 03/2014 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
0x2C02 | 0x3402 - Motor (ASM): Parameter
Subindex 7: Motor: Rated voltage
Setting range
(min. value | unit | max. value)
Lenze setting
0 V 65535 225 V
 Write access  CINH  OSC  P  RX  TX UNSIGNED_16
Subindex 8: Motor: Rated cosine phi
Setting range (min. value | unit | max. value) Lenze setting
0.00 655.35 0.80
 Write access  CINH  OSC  P  RX  TX Scaling: 1/100 UNSIGNED_16
Subindex 9: Motor: Insulation class
Selection list (Lenze setting printed in bold)
0 Y (cut-off temperature = 90°C)
1 A (cut-off temperature = 105 °C)
2 E (cut-off temperature = 120°C)
3 B (cut-off temperature = 130°C)
4 F (cut-off temperature = 155°C)
5 H (cut-off temperature = 180°C)
6 G (cut-off temperature > 180°C)
 Write access  CINH  OSC  P  RX  TX UNSIGNED_8
Subindex 10: Motor: Designation
 Write access  CINH  OSC  P  RX  TX STRING(50)
Sub. Name Lenze setting Data type
 1 Motor (ASM): Rotor resistance 0.0000 Ohm UNSIGNED_32
 2 Motor (ASM): Mutual inductance 0.0 mH UNSIGNED_32
 3 Motor (ASM): Magnetising current 0.00 A UNSIGNED_16
Subindex 1: Motor (ASM): Rotor resistance
Setting range (min. value | unit | max. value) Lenze setting
0.0000 Ohm 214748.3647 0.0000 Ohm
 Write access  CINH  OSC  P  RX  TX Scaling: 1/10000 UNSIGNED_32
Subindex 2: Motor (ASM): Mutual inductance
Setting range (min. value | unit | max. value) Lenze setting
0.0 mH 214748364.7 0.0 mH
 Write access  CINH  OSC  P  RX  TX Scaling: 1/10 UNSIGNED_32
Subindex 3: Motor (ASM): Magnetising current
Setting range (min. value | unit | max. value) Lenze setting
0.00 A 500.00 0.00 A
 Write access  CINH  OSC  P  RX  TX Scaling: 1/100 UNSIGNED_16