Lenze i700 - Manual (Page 14)

1 About this documentation
1.2 Terminology used
14
Lenze · i700 servo inverter · Reference manual · DMS 1.5 EN · 03/2014 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1.2 Terminology used
Term Meaning
Engineering Tools Software solutions for simple engineering at all stages
»EASY Navigator« – Ensures easy operator guidance
• All practical Lenze engineering tools at a glance
• Tools can be selected quickly
• Clearly arranged, simplifying the engineering process from the start
»EASY Starter« – Simple tool for service technicians
• Especially developed for the commissioning and maintenance of Lenze
devices
• Graphical user interface with few buttons
• Simple online diagnostics, parameterisation and commissioning
• No risk of accidentally changing the application
• Ready applications can be loaded to the device
»PLC Designer« – for process programming
• Creation of individual programs
• Programming of Logic & Motion in accordance with IEC 61131-3 (IL, LAD,
FBD, ST, SFC, and CFC editor), is based on CoDeSys V3
• Certified function blocks according to PLCopen Part 1 + 2
• Graphical DIN 66025 editor (G-code) with DXF import
• Integrated visualisation for an easy process representation
• All important pieces of information at a glance during commissioning
Lenze Controller The Lenze Controller (abbreviated: "Controller") is the central component of the
automation system which (by means of the runtime software) controls the Logic and
Motion functionalities.
The Lenze Controller communicates with the field devices via the fieldbus.
Engineering PC Use the Engineering PC and the engineering tools installed to configure and
parameterise the system.
The Engineering PC communicates with the Lenze Controller via Ethernet.
EtherCAT® is a real-time capable Ethernet system with top performance.
EtherCAT® is a registered trademark and patented technology licensed by Beckhoff
Automation GmbH, Germany.
HIPERFACE® HIPERFACE® stands for High Performance Interface and is a universal interface between
motor feedback system and inverter.
HIPERFACE® is a registered trademark of the SICK STEGMANN GmbH.
Object "Container" for one or several parameters which can be used to parameterise or monitor
the i700 servo inverter.
Index For the purpose of addressing, each object is provided with a unique index.
In this documentation the index is represented as a hexadecimal value and is identified
by a prefixed "0x", e.g. "0x1000".
Subindex If an object contains several parameters, the individual parameters are stored under
"subindexes".
In this documentation the colon is used as a separator between the index and the
subindex, e.g. "0x1018:1".
Touch probe A "Touch probe" is an event which can for instance be actuated in an edge-controlled
manner via a digital input to detect an actual value (that changes quickly) at the time of
activation and to process it further within the program afterwards.