Westermo RedFox Series - Manual (Page 141)

Westermo OS Management Guide
Version 4.17.0-0
Example
example:/#> boot
example:/boot/#> usb
example:/boot/usb/#> timeout 10
example:/boot/usb/#> show
Status : Enabled
Timeout : 10 second(s)
example:/boot/usb/#> leave
example:/#>
7.3.15 Manage bootloader settings (Barebox)
Syntax [no] loader
Context System Bootstrap context
Usage Enter System Bootloader context to configure settings related to the
(Barebox) bootloader boot-menu. (You enter the boot-menu by pressing
Ctrl-C on the console port when a unit boots.
Note
The System Bootloader context is only available for products running
the Barebox bootloader.
”no loader” will reset all bootloader settings to default.
Use ”show loader” to list all bootloader settings (also available as ”show”
command within the
System Bootloader context.
Default values N/A
Example
example:/boot/#> show loader
Device Bootloader Configuration:
Login Password: Disabled
Rescue Mode Settings:
Address: 192.168.2.200
Netmask: 255.255.255.0
Peer
: 192.168.2.1
Port : 6000
example:/boot/#>
➞ 2015 Westermo Teleindustri AB 141