Example – Westermo RedFox Series User Manual

Page 236

Advertising
background image

Westermo OS Management Guide

Version 4.17.0-0

Example

falcon:/#> configure
falcon:/config/#> no vlan 1006
falcon:/config/#> end
Port dsl 1

did not belong to any VLAN, setting as untagged in VLAN 1.

vlans: Problem activating settings.
There was some problem activating your configuration changes!

This could result in a non-functional system, continue anyway (y/N)? y
OK, accepting configuration anyway -- please review the running configuration.
Stopping DHCP Clients ...................................... [ OK ]
Configuration activated.

Remember "copy run start" to save to flash (NVRAM).

falcon:/#> show vlan
Press Ctrl-C or Q(uit) to quit viewer, Space for next page, <CR> for next line.

VID

Name

Oper Untagged/Tagged

---- ---------------- ---- ---------------------------------------------------

1 vlan1

UP

U:ALL
T:

------------------------------------------------------------------------------
falcon:/#> cp running-config startup-config
falcon:/#>

There are additional setting you may consider changing when running the Falcon
as a switch:

Limit remote management: When the xDSL port is mapped to VLAN 1, the

Falcon will be open for remote management via the xDSL port just as it is
via the Ethernet ports on VLAN 1.

This is usually no problem, as the Falcon by default is assigned the default IP
address (192.168.2.200) on interface vlan1, and that address is not routable
via the ISP. However, if limiting remote management is still a concern, you
could, e.g., remove the IP address of interface vlan1. The Falcon can then
be managed only via the console port (CLI) instead.

Example

falcon:/#> configure
falcon:/config/#> iface vlan1
falcon:/config/iface-vlan1/#> inet static
falcon:/config/iface-vlan1/#> show address
192.168.2.200/24
falcon:/config/iface-vlan1/#> no address
falcon:/config/iface-vlan1/#> leave
Configuration activated.

Remember "copy run start" to save to flash (NVRAM).

falcon:/#>

As switch there is no firewall: Acting as a switch, the Falcon no longer serves

as a firewall towards the Internet. You should therefore ensure that you

236

➞ 2015 Westermo Teleindustri AB

Advertising
This manual is related to the following products: