Westermo RedFox Series - Manual (Page 770)

Westermo OS Management Guide
Version 4.17.0-0
33.3.1 Managing PPPoE connections
Syntax [no] pppoe <ID>
Context Global Configuration context
Usage Enter the PPPoE configuration context of the given PPPoE instance ID. If
this is a new PPPoE instance, the PPP instance will be created first upon
leaving the PPP context with end or leave. An associated network interface
pppoe<ID> (e.g., pppoe0) will be created (see
chapter 19 ).
Use ”no pppoe <ID>” to remove an existing PPP instance, or no pppoe to
remove all PPP instances.
As of WeOS v4.17.0 only a single PPPoE instance (ID ”0”) is supported.
Default values Not applicable.
33.3.2 PPPoE VLAN Interface Setting
Syntax [no] iface <IFNAME>
Context PPPoE Configuration context
Usage Set the (VLAN) network interface where this PPPoE instance should oper-
ate, e.g., ”iface vlan10”.
Use ”show iface” to check the interface setting for this PPPoE instance.
Default values None defined
33.3.3 PPPoE Service Name
Syntax [no] service-name <SERVICE-NAME>
Context PPPoE Configuration context
Usage ISP name or a class of service configured on PPP.
Use ”show service-name” to check the service name setting for this PPPoE
instance.
Default values Disabled (”no service-name”)
770 ➞ 2015 Westermo Teleindustri AB