Westermo RedFox Series - Manual (Page 940)

Westermo OS Management Guide
Version 4.17.0-0
Default values 500
Error messages None defined yet.
40.2.12 Setting Broadcast Delay
Syntax [no] broadcast-delay <MILLISECONDS>
Context modbus context (server mode only)
Usage Set Broadcast Delay, i.e., time to wait after transmitting an broadcast.
Allowed values are in range <0-65535> (milliseconds).
Only applicable when configuring the Modbus Gateway in ”server” mode
(see
section 40.2.2 ).
Default values 100
Error messages None defined yet.
40.2.13 Setting Redirect
Syntax [no] redirect <MODBUS-ADDR>
Context modbus context (server mode only)
Usage Set redirect, i.e., redirect all Modbus addresses to this address. Allowed
values are in range <1-255> (seconds)
Only applicable when configuring the Modbus Gateway in ”server” mode
(see
section 40.2.2 ).
Default values Disabled
Error messages None defined yet.
40.2.14 Setting Redirect Broadcast
Syntax [no] redirect-broadcast (server mode only)
Context modbus context
940 ➞ 2015 Westermo Teleindustri AB