Westermo RedFox Series - Manual (Page 190)

Westermo OS Management Guide
Version 4.17.0-0
Usage Configuration of (fallback) default-VID for this port. The default-VID con-
figuration is only valid when this port is not configured ”untagged” on any
VLAN.
Use ”no default-vid” to clear the (fallback) default VID setting (the default-
VID setting will also be cleared whenever the port is associated ”untagged”
with any VLAN).
When cleared (”no default-vid”), VLAN ID 1 will be used as the port’s
fallback default-VID.
For more information see section 8.1.10 .
Use ”show default-vid” to show the port’s ”fallback default-VID” setting.
Default values Disabled/cleared (no default-vid).
8.3.15 Show port status (all ports)
Syntax show ports
Context Admin Exec context
Usage Show Port status information for all ports.
Default values Not applicable.
190 ➞ 2015 Westermo Teleindustri AB