Westermo RedFox Series - Manual (Page 938)

Westermo OS Management Guide
Version 4.17.0-0
40.2.6 Setting ASCII Timeout
Syntax [no] ascii-timeout <MILLISECONDS>
Context modbus context
Usage Set ASCII Timeout, i.e., the maximum time between two frames in ASCII
mode. Allowed range is <10-7050> (milliseconds).
Use ”no ascii-timeout” to reset the timeout to the default value.
The ”ascii-timeout” command is only applicable when configuring the
Modbus Gateway to use ”ascii” as serial protocol (see
section 40.2.4 ).
Default values 1000
Error messages None defined yet.
40.2.7 Setting RTU Interval
Syntax [no] rtu-interval <MILLISECONDS>
Context modbus context
Usage Set RTU Interval, i.e., the minimum time between two frames in RTU
mode. Allowed range is <10-7050> (milliseconds).
Use ”no rtu-interval” to reset the timeout to the default value.
The ”rtu-interval” command is only applicable when configuring the Mod-
bus Gateway to use ”rtu” as serial protocol (see
section 40.2.4 ).
Default values 50
Error messages None defined yet.
40.2.8 Setting Poll Interval
Syntax [no] poll-interval <MILLISECONDS>
Context modbus context (server mode only)
Usage Set Poll Interval. Allowed values are in range <10-65535> (milliseconds).
938 ➞ 2015 Westermo Teleindustri AB