Westermo RedFox Series User Manual
Page 164
Westermo OS Management Guide
Version 4.17.0-0
Continued from previous page
Feature
General Description
fallback default-VID
X
PHY fine tuning
X
Shielded/Unshielded TP cable
X
TX power mode
X
View port configuration
X
X
View port status
X
X
View SFP DDM/DOM diagnostics
X
X
8.1.1
Port naming conventions
The convention to name communication ports such as Ethernet ports, DSL ports,
and Serial ports differs between WeOS products and product families.
8.1.1.1
Simple numbering
Lynx, Falcon, DDW-142 (Wolverine), RedFox Industrial Rack, RedFox Rail, and
Viper all use a simple port ID to refer to their ports.
❼ Lynx[
]: Ethernet ports on Lynx and RedFox
Industrial Rack are named 1, 2, 3, . . .
❼ Falcon[
] and some Wolverine units (DDW-142[
]): These
units have multiple port types; Ethernet, serial port(s) and xDSL/SHDSL (Fal-
con/Wolverine), which are numbered individually per port type. For example,
Falcon is equipped with:
– four Ethernet ports (numbered 1, 2, 3 and 4),
– one xDSL port (numbered 1), and
– one serial port (numbered 1).
As Ethernet and xDSL ports can be used in overlapping contexts, e.g., they
can be associated with the same VLAN, a port qualifier (”eth” or ”dsl”) is
164
➞ 2015 Westermo Teleindustri AB