Westermo RedFox Series - Manual (Page 359)

Westermo OS Management Guide
Version 4.17.0-0
”no hello-time” resets the hello time to the default setting.
Use ”show hello-time” to view the current hello time setting.
Default values 2 (seconds)
Error messages An error message is given if the ”hello-time” is not given a
valid value with respect to ”max-age-time”, see section 16.1.1 .
16.3.5 Forward Delay
Syntax forward-delay <4-30>
Context Spanning Tree Configuration context
Usage Set spanning-tree forward delay. Since bridges use the forward delay
configured at the root bridge, this parameter setting only matters if this
bridge becomes the root bridge.
”no forward-delay” resets the forward delay to the default setting.
Use ”show forward-delay” to view the current forward delay setting.
Default values 15 (seconds)
Error messages An error message is given if the ”forward-delay” is not given
a valid value with respect to ”max-age-time”, see section 16.1.1 .
16.3.6 Manage RSTP Ports
Syntax [no] stp-port <PORTLIST|all>
Context Spanning Tree Configuration context
Usage Enter Spanning Tree Port Configuration context to manage per port spanning-
tree settings for one or more ports.
”no stp-port <PORTLIST|all>” (e.g., ”no stp-port all”) will disable span-
ning tree for the specified ports.
Use ”show stp-port <PORTLIST|all>” to view the spanning tree settings
for the specified port(s).
Default values Not applicable.
➞ 2015 Westermo Teleindustri AB 359