Westermo RedFox Series - Manual (Page 373)

Westermo OS Management Guide
Version 4.17.0-0
17.2.2 Create new link aggregate using the web interface
Menu path: Configuration ⇒ Port ⇒ Aggregate ⇒ New
When clicking the New button, you will be presented to the aggregate new page.
Name The link aggregate name. Valid values are A{n} or a{n},
where n is an integer.
Ports The set of ports to be included in this aggregate. Only ports in
the same slot may be aggregated together.
Type The type of the aggregate, Static or LACP.
LACP Mode Only available for type LACP. Modes:
Active Always send frames (LACP-PDUs) along
the configured links.
Passive Only send frames (LACP-PDUs) along
the configured links if any LACP-PDU
frames have been received.
LACP Timeout Only available for type LACP. The type of the aggregate:
Short 3 seconds
Long 90 seconds
For more information, see section 17.1 .
➞ 2015 Westermo Teleindustri AB 373