Westermo RedFox Series - Manual (Page 413)

Westermo OS Management Guide
Version 4.17.0-0
Continued from previous page
Address
method The IPv4 address assignment method used for the interface: Static
means the IPv4 address is configured manually, Dynamic means the
address is acquired automatically via DHCP (for VLAN interfaces) or
is part of the PPP configuration (for PPP interfaces), and Disabled
means IPv4 address assignment is disabled on the interface.
Address/
Netmask The IPv4 address, and its associated netmask, assigned to the inter-
face. The netmask identifies what IP addresses are located on the
same subnet. Displays configured IP address, when address method
Static is used. Displays the dynamically assigned address, or Pend-
ing if Dynamic address method is set. Text Disabled is shown if IP
address assignment is disabled. Text Owned is shown when there is
a PPPoE interface associated with that VLAN interface. Secondary
addresses assigned to the interface are also listed.
Edit Click this icon to edit the interface.
Sort by The list of interfaces may be sorted either in a default sort order,
or by the distance value. Select desired sort order and press apply
button.
When clicking the Edit icon for an interface you will be presented to its associated
edit page.
➞ 2015 Westermo Teleindustri AB 413