Westermo RedFox Series - Manual (Page 297)

Westermo OS Management Guide
Version 4.17.0-0
Usage Use the ”dynamic adaptive” command to enable WeOS Adaptive Dy-
namic Trunking (AVT) on the switch. For more information on AVT in sec-
tion 13.1.7 .
Future versions of WeOS may include support for dynamic VLAN via GVRP in
addition to AVT, but currently only AVT is supported.
Use ”no dynamic” to disable dynamic VLAN support.
Use ”show dynamic” to see the dynamic VLAN setting.
Default values Disabled
13.4.6 Managing individual VLANs
Syntax [no] vlan <VID>
Context Global Configuration context
Usage Enter VLAN Configuration context of the given VID. If this is a new VLAN,
the VLAN will be created first upon leaving the VLAN context with end or
leave.
Use ”no vlan <VID>” to remove an existing VLAN. The default VLAN (VLAN 1)
cannot be removed. Removal of a VLAN may imply that some ports will no
longer be associated with any VLAN - such ports will be configured to the
default VLAN (VLAN 1) untagged.
Use ”show vlan” (or ”show vlans”) to list all configured VLANs and general
VLAN settings. Use ”show vlan VID” to list detailed configuration informa-
tion for a specific VLAN (also available as ”show” command within the
VLAN
Configuration context of the given VID.
Default values Not applicable.
➞ 2015 Westermo Teleindustri AB 297