Westermo RedFox Series - Manual (Page 576)

Westermo OS Management Guide
Version 4.17.0-0
24.4 Digital I/O
WeOS products are typically equipped with a Digital I/O connector as the one
shown in
fig. 24.11 . The location of the connector differs between products; on
RedFox Industrial it is located on the CPU card as shown in fig. 24.12 ).
1
2
3
4
Figure 24.11: Digital I/O connector.
The Pin-Out of the Digital I/O connector is typically as follows:
Position Description
1 Digital-Out + (Relay Output +)
2 Digital-Out - (Relay Output -)
3 Digital-In +
4 Digital-In -
Note
For a detailed specification on the Digital I/O connector (definite pin-out
mapping, voltage levels, etc.), see the User Guide of your specific WeOS
product (
section 1.5 ).
576 ➞ 2015 Westermo Teleindustri AB