Westermo RedFox Series - Manual (Page 240)

Westermo OS Management Guide
Version 4.17.0-0
Continued from previous page
Default
Gateway Statically configured default gateway of the unit. This is the
IP address of the gateway to send packages to when no more
specific route can be found in the routing table. This value
overrides any value retrieved dynamically (e.g. using DHCP).
Leave empty to enable dynamically retrieved gateway address
or if no default gateway should be available.
PPPoE Settings
Figure 11.5: Basic Setup PPPoE
If the PPPoE mode is selected you are asked to fill in the following entries.
Username The username provided by the PPPoE provider.
Password The password provided by the PPPoE provider.
240 ➞ 2015 Westermo Teleindustri AB