5 leds, Section 24.5 – Westermo RedFox Series User Manual
Page 579
Westermo OS Management Guide
Version 4.17.0-0
24.5
LEDs
The LED functionality when running WeOS is described in the User Guide of your
product (
). Here the information on LED functionality of all WeOS
products is summarised. Note that your product may not have all LED types
listed here.
LED
Status
Description
ON
OFF
Unit has no power
GREEN
All OK, no alarm condition.
RED
Alarm condition, or until unit has started up.
(Alarm conditions are configurable, see
GREEN BLINK
Location indicator (”Here I am!”). Activated
when connected to WeConfig Tool, or upon re-
quest from Web, or when entering the CLI con-
figuration context.
Duration of blinking: 10
seconds.
RED BLINK
Location indicator (see previous item) or indi-
cation of pending cable factory reset, see
DC1
1
OFF
Unit has no power.
GREEN
Power OK on DC1.
RED
Power failure on DC1.
DC2
1
OFF
Unit has no power.
GREEN
Power OK on DC2.
RED
Power failure on DC2.
AC1
OFF
Unit has no power.
GREEN
Power OK on AC1.
FRNT
OFF
FRNT disabled
GREEN
FRNT OK. (See also the FRNT Error item below.)
RED
FRNT Error. A focal point can detect and indi-
cate local FRNT errors (FRNT link down) as well
as FRNT errors elsewhere in the FRNT ring. A
member switch only detects and indicates lo-
cal FRNT errors (FRNT link down).
BLINK
Unit configured as focal point.
RSTP
OFF
RSTP disabled.
Continued on next page
➞ 2015 Westermo Teleindustri AB
579