Westermo RedFox Series - Manual (Page 548)

Westermo OS Management Guide
Version 4.17.0-0
24.2.2 Trigger configuration overview page
Menu path: Configuration ⇒ Alarm ⇒ Triggers
When entering the Alarm configuration page you will be presented to a list of all
alarm triggers configured on your unit, see below.
Figure 24.6: The alarm trigger configuration overview page.
Trigger The index number of this trigger.
Type The trigger type.
Enabled A green check-mark means the trigger is enabled,
and a dash means it is disabled.
Action The index of the action profile associated with this
trigger.
The action profile controls what targets
(LED, Digital Out, SNMP traps and/or Logging) to in-
voke for this alarm trigger.
Source A list of alarm sources associated with this trigger.
For link alarms, this is a list of port numbers, for a
power alarm it is the identifiers for the associated
power sensors, etc.
Edit Click this icon to edit a trigger.
Delete Click this icon to remove a trigger.
New Trigger Click this button to create a new alarm trigger. You
will be presented to a form where you can configure
the new trigger.
548 ➞ 2015 Westermo Teleindustri AB