Westermo RedFox Series - Manual (Page 376)

Westermo OS Management Guide
Version 4.17.0-0
17.3 Managing Link Aggregation via CLI
Command Default Section
Configure Link Aggregate
[no] aggregate <AGGREGATE_ID>
N/A Section 17.3.1
[no] enable Enabled Section 17.3.2
[no] ports <PORTLIST> N/A Section 17.3.3
[no] type <static|flhp|lacp> lacp Section 17.3.4
LACP Specific Settings
[no] active
active Section 17.3.5
[no] timeout <short|long> short Section 17.3.6
Aggregate Status
show aggregate
Section 17.3.7
17.3.1 Manage a Link Aggregate
Syntax [no] aggregate <AGGREGATE_ID>
Context Global Configuration context
Usage Create, modify or remove a link aggregate.
Enter the Link Aggregate Configuration context of the given aggregate iden-
tifier (a0-aN), where N is a number (up to 8 aggregates can be created). If
this is a new link aggregate, the aggregate is created.
Use ”no aggregate <AGGREGATE_ID>” to remove an existing link aggre-
gate, or ”no aggregate” to remove all link aggregates.
Use ”show aggregate” to list configured aggregates. To list details of a
configured aggregate, enter its configuration context and run ”show” from
there.
Default values When using the ”no aggregate” form (without providing a spe-
cific aggregate ID), all link aggregates are removed.
Example Listing configured aggregates, and listing details for a LACP aggre-
gate.
376 ➞ 2015 Westermo Teleindustri AB