Westermo RedFox Series - Manual (Page 862)

Westermo OS Management Guide
Version 4.17.0-0
Note
Tunnels which are not intended to be used should either be deleted
(
section 36.3.1 ) or disabled.
Default values Enabled
36.3.4 SSL VPN Description Setting
Syntax [no] description <STRING>
Context SSL VPN Configuration context
Usage Set or remove the SSL VPN description string.
Use ”description <STRING>” to set a description for this database.
Use ”no description” to remove the current description.
Use citation marks around the string if you want to have a description con-
taining space characters.
To view the current description, use ”show description”.
Default values Empty.
Examples
Example
example:/config/tunnel/ssl-19/#> description secrets
or ...
example:/config/tunnel/ssl-19/#> description ’’Office tunnel’’
36.3.5 Configure tunnel type
Syntax [no] type <layer2|layer3>
Context SSL VPN Configuration context
Usage Change which type of tunnel you want to use, select layer2 (sometimes
called bridged) or layer3 (sometimes called routed). ”no type” reset to
layer3.
Default values layer3
862 ➞ 2015 Westermo Teleindustri AB