Westermo RedFox Series - Manual (Page 298)

Westermo OS Management Guide
Version 4.17.0-0
Example
example:/config/#> show vlan 1
VLAN ID : 1
Status : Enabled
Name : vlan1
Channel : 0
Priority : Disabled
Untagged : U:eth 1-4
Tagged : T:
Forbid : F:
IGMP : Enabled
Learning : Enabled
802.1Q VLAN : Enabled
802.1X Auth : Disabled
MAC Auth : Disabled
Except Port Auth :
example:/config/#>
13.4.7 Enable/disable a VLAN
Syntax [no] enable
Context VLAN Configuration context
Usage Enable or disable a VLAN. A disabled VLAN is similar to a deleted VLAN,
except that its configuration is stored, and will be activated when the VLAN
is enabled. That is, when a VLAN is disabled, its ports may be moved onto
the default VLAN (unless they are associated with another VLAN), and any
network interface associated with the VLAN will be disabled.
Use ”show enable” to view the current configuration.
Default values enable
13.4.8 VLAN name
Syntax name <ID>
Context VLAN Configuration context
Usage Specify VLAN name, i.e., VLAN description. Max 15 characters, only
alpha-numerical characters ([a-z,A-Z,0-9]) allowed.
Use ”show name” to view the VLAN name setting.
298 ➞ 2015 Westermo Teleindustri AB