Westermo RedFox Series User Manual
Page 211
Westermo OS Management Guide
Version 4.17.0-0
Continued from previous page
DSL Rate
Speed setting is only valid if the port is configured as CO (the
CPE rate setting is not used, since the CPE speed automati-
cally follows the CO to which it becomes connected).
See
for information on using SHDSL-turbo
speed data rates.
Default is Auto.
Mode
The noise-margin mode. The noise-margin mode setting is
only valid if the port is configured as CO (the CPE setting is not
used, since the CPE noise-margin mode automatically follows
the CO to which it becomes connected).
The CO can be configured to choose a faster less reliable
speed (High Speed), a slower more reliable speed (Reliable),
or a tradeoff between these two objectives (Normal).
Default is Normal.
Link Alarm
When link alarm is enabled an alarm will be generated if port
link is down. Alarms trigger an SNMP trap message to be sent
and alarms to be shown on the administration web.
Edit
Click this icon to edit a port’s settings.
➞ 2015 Westermo Teleindustri AB
211