Westermo RedFox Series - Manual (Page 532)

Westermo OS Management Guide
Version 4.17.0-0
Append
Appends a new option 82 in addition to any existing option 82.
Discard
Drops the whole packet if it contains an option 82.
Replace
Removes any existing option 82 and adds a new option 82.
Require
Requires that the incoming packet contains an option 82 otherwise it
will be dropped.
Default values Option 82 is disabled by default, if enabled and policy is omitted
it defaults to forward.
23.3.8 Circuit ID Type
Syntax [no] circuitid-type <portname | portdescription>
Context DHCP Relay Configuration context
Usage Specify how the circuit id in option 82 will be set. portname will use
the name of the port as it is printed on the front foil plus the port type.
For Ethernet ports it will be Eth, so e.g. requests coming in on port 6 will
have the Circuit ID set to “Eth6”. portdescription is currently the same as
portname but will use the port description set in the port configuration, as
soon as that feature is released.
Default values portname.
23.3.9 Remote ID Type
Syntax [no] remoteid-type <mac | ip | system-name>
Context DHCP Relay Configuration context
Usage Specify how the remote id in option 82 will be set. mac will use the base
MAC address of the unit. ip will use the IP address of the inbound interface.
system-name will use the hostname.
Default values mac
532 ➞ 2015 Westermo Teleindustri AB