Westermo RedFox Series - Manual (Page 869)

Westermo OS Management Guide
Version 4.17.0-0
Usage The normal behaviour is to deny clients which connect with a CN (com-
mon name) that is already connected. Enabling this setting will allow the
second connection.
Note
This is a serious security risk, use only if you know what you are doing,
you should look to combine this with an aaa-method (
Section 36.3.12 )
Default values Disabled
36.3.24 Change pull settings
Syntax [no] pull
Context SSL VPN Configuration context (Only valid when client)
Usage In client mode the client may receive routes and ip address from the
server. When setting ”no pull” all these settings the server tries to push,
will be discarded.
Default values Enabled
36.3.25 Show SSL Tunnel Status
Syntax show tunnel ssl [ID]
Context Admin Exec context.
Usage Show the status for all or for a specific SSL tunnel.
Default values If no tunnel ID is specified, the status of all SSL tunnels is shown.
➞ 2015 Westermo Teleindustri AB 869