Westermo RedFox Series - Manual (Page 58)

Westermo OS Management Guide
Version 4.17.0-0
5.4.2 Execute (do) command from Admin Exec context
Syntax do <COMMAND>
Context All contexts
Usage Use the ”do <COMMAND>” to execute a COMMAND available in Admin Exec
context from any context.
For example, when located in Global Configuration context, the user could
run ”do show running-config” to see the running configuration, or run
”do ping 192.168.1.1” to ”ping” IP address 192.168.1.1.
Default values Not applicable
5.4.3 End context
Syntax end
Context All contexts
Usage Leave this context and return to the context immediately above. If this
command is issued within any of the configuration contexts, the command
implies that the configuration changes conducted within that context are
confirmed. If the command is issued in the
Global Configuration context,
the user returns to the Admin Exec context, and the running-configuration
is updated.
Default values Not applicable
5.4.4 Leave context
Syntax leave
Context All contexts
Usage Leave this context and return to the Admin Exec context. If this command
is issued within any of the configuration contexts, the command implies
that the configuration changes conducted are confirmed, and the running-
configuration is updated.
Default values Not applicable
58 ➞ 2015 Westermo Teleindustri AB