Westermo RedFox Series - Manual (Page 622)

Westermo OS Management Guide
Version 4.17.0-0
Use the ”always” keyword to make the router always advertise the default
route, regardless if it has one or not. Without the "always" keyword, it will
only advertise if it has one.
Use ”show distribute-default” to show the whether this router is config-
ured to inject a default route into the OSPF domain.
Default values Disabled (”no distribute-default”)
27.3.7 Configure Redistribution of External Route Information
into OSPF Domain
Syntax [no] redistribute <connected|static|rip> [metric-type <1|2>]
[metric <0-16777214>]
Context Router OSPF Configuration context
Usage Import external routing information into the OSPF domain. Redistribution
of connected routes, static routes, and routes learnt via RIP is handled inde-
pendently, e.g., use ”redistribute rip” to import routes learnt via RIP.
Use ”no redistribute” to remove all redistribution, and ”no redistribute
rip” to remove redistribution of routes learnt via RIP, etc.
Use ”show how redistribute [<connected|static|rip>]” to show the
OSPF redistribution settings. Use ”show redistribute” to show all redis-
tribution settings, or ”show redistribute connected”, etc., to show redis-
tribute settings for specific types of redistribution.
Default values Disabled (”no redistribute”)
27.3.8 Configure Admin Distance for OSPF
Syntax [no] distance <1-255>
Context Router RIP Configuration context
Usage Configure admin distance for all routes learnt via OSPF. If the same route
is learnt via different routing protocols (or as connected or static route), the
route associated with the lowest admin distance will be used. For OSPF the
admin distance defaults to 110. See also
sections 19.2.6 and 26.1.3 .
Use ”no distance” to reset the OSPF admin distance to its default value.
622 ➞ 2015 Westermo Teleindustri AB