Westermo RedFox Series User Manual
Page 66
Westermo OS Management Guide
Version 4.17.0-0
LFF Remote Fail OID: iso(1).org(3).dod(6).internet(1).private(4).
enterprises(1).westermo(16177).common(2).weos(1).notifications(6).
lffNotifications(3).lffNotificationPrefix(0).lffRemoteFail(2)
❼ PoE total power consumption: On units with Ethernet ports supporting
Power over Ethernet, traps are generated with the total consumed power
rises above (or falls below) a configurable threshold.
Power consumption above threshold OID: iso(1).org(3).dod(6).internet(1).
mgmt(2).mib-2(1).powerEthernetMIB(105).pethNotifications(0).
pethMainPowerUsageOnNotification(2)
Power consumption below threshold OID: iso(1).org(3).dod(6).internet(1).
mgmt(2).mib-2(1).powerEthernetMIB(105).pethNotifications(0).
pethMainPowerUsageOffNotification(3)
❼ Summary Alarm Status: The summary alarm status (summaryAlarmSta-
tus) follows the status of the ON LED:
– when the ON LED turns red, the summaryAlarmStatus has value Warn-
ing (1).
– when the ON LED turns green, the summaryAlarmStatus has value OK
(2).
It is possible to get SNMP traps when the summary Alarm Status changes
state (see
for information of how to enable summary alarm
traps). When enabled, a summaryAlarmOK trap is sent when the ON LED
turns green, and a summaryAlarmWarning trap is sent when it turns red.
Summary Alarm OK OID: iso(1).org(3).dod(6).internet(1).private(4).
enterprises(1).westermo(16177).common(2).weos(1).notifications(6).
genericNotifications(4).genericNotificationPrefix(0).summaryAlarmOK(1)
Summary Alarm Warning OID: iso(1).org(3).dod(6).internet(1).private(4).
enterprises(1).westermo(16177).common(2).weos(1).notifications(6).
genericNotifications(4).genericNotificationPrefix(0).summaryAlarmWarning(2)
The summary alarm status can be read at the following OID:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).westermo(16177).
common(2).weos(1).system(5).eventSystem(2).summaryAlarmStatus(1)
66
➞ 2015 Westermo Teleindustri AB