Westermo RedFox Series - Manual (Page 482)

Westermo OS Management Guide
Version 4.17.0-0
Use ”show server” to show the configured members of the server group
(listed order is fall-back order).
Default values Empty. This will reject authentication for the services using this
group.
21.3.16 Manage IEEE 802.1X authentication instances
Syntax [no] dot1x-auth <ID>
Context AAA Configuration context
Usage Enter 802.1X Configuration context to create, modify or remove an IEEE
802.1X authentication instance.
Use ”dot1x-auth <ID>” to create a new 802.1X authentication instance,
or to enter the configuration context of an existing instance. (As of WeOS
v4.17.0 you can only create one 802.1X authentication instance.) ”ID” must
be a number greater or equal to 0 and is referenced from other commands.
Important
Creating an IEEE 802.1X authentication instance does not in itself acti-
vate authentication. Port access is managed in the VLAN configuration.
See
section 13.2 . The created 802.1X instance must be referenced
from the port access configuration for it to be used!
Use ”no dot1x-auth <ID>” to remove a specific instance, or ”no dot1x-auth”
to remove all 802.1X instances.
Use ”show dot1x-auth” to list all 802.1X authentication instances, or ”show
dot1x-auth <ID>” to show information on a specific instance (also avail-
able as ”show” command within the
802.1X Configuration context).
Default values Not applicable.
21.3.17 Enable/Disable an IEEE 802.1X authentication instance
Syntax [no] enable
Context 802.1X Configuration context
482 ➞ 2015 Westermo Teleindustri AB