Westermo RedFox Series - Manual (Page 939)

Westermo OS Management Guide
Version 4.17.0-0
Only applicable when configuring the Modbus Gateway in ”server” mode
(see
section 40.2.2 ).
Default values 50
Error messages None defined yet.
40.2.9 Setting Error Check
Syntax [no] error-check
Context modbus context
Usage Enabled/disables Error Check.
Default values Enabled
Error messages None defined yet.
40.2.10 Setting Inactivity Timeout
Syntax [no] inactivity-timeout <SECONDS>
Context modbus context (server mode only)
Usage Set Inactivity Timeout. Allowed values are in range <10-65535> (sec-
onds).
Only applicable when configuring the Modbus Gateway in ”server” mode
(see
section 40.2.2 ).
Default values Disabled
Error messages None defined yet.
40.2.11 Setting Response Timeout
Syntax [no] response-timeout <MILLISECONDS>
Context modbus context
Usage Set Response Timeout. Allowed values are in range <1-65535> (millisec-
onds).
➞ 2015 Westermo Teleindustri AB 939