Section 39.3.28, Section 39.3.29, Section 39.3.30 – Westermo RedFox Series User Manual
Page 924: Section 39.3.31
Westermo OS Management Guide
Version 4.17.0-0
39.3.28
Show Serial Over IP Frame Size Setting
Syntax show frame-size
Context seroip context
Usage Show the Serial Over IP frame size setting
Default value Not applicable.
39.3.29
Show Serial Over IP Peer Setting
Syntax show peer
Context seroip context
Usage Show the Serial Over IP peer setting
Default value Not applicable.
39.3.30
Show Serial Over IP Dynamic Peer Setting
Syntax show dynamic-peer
Context seroip context
Usage Show the Serial Over IP dynamic-peer setting. (The ”dynamic peer” set-
ting is referred to as ”latest calling” in Westermo EDW-100.)
Default value Not applicable.
39.3.31
Managing AT Command Profiles
Syntax [no] atcmd [ID]
Context Global Configuration context
Usage Enter/create the AT Command profile context of the given AT Profile in-
stance ID. If this is a new instance, the instance will be created first upon
leaving the AT Command profile context with end or leave.
Use ”no atcmd <ID>” to remove an existing AT Command profile instance,
or ”no atcmd” to remove all profiles.
924
➞ 2015 Westermo Teleindustri AB