Westermo RedFox Series - Manual (Page 153)

Westermo OS Management Guide
Version 4.17.0-0
– If RSTP/STP is enabled on the discovered device, the letter ”R” is shown.
– If SNMP is enabled on the discovered device, the letter ”S” is shown.
– If IGMP Snooping is enabled on the discovered device, the letter ”I” is
shown.
7.3.35 Manage Port Monitoring
Syntax [no] monitor
Context Admin Exec context
Usage Use the ”monitor” command to enter the Port Monitoring context.
”no monitor” will disable port monitoring (in the same way as ”no enable”
within the
Port Monitoring , see section 7.3.36 ).
Use ”show monitoring” to show port monitoring settings (also available as
”show” command within the
Port Monitoring context).
Default values Not applicable.
7.3.36 Enable/disable Port Monitoring
Syntax [no] enable
Context Port Monitoring context
Usage Enable port monitoring. Use ”no enable” to disable port monitoring.
Use ”show enable” to list whether port monitoring is enabled or disabled.
Default values no enable (disabled)
7.3.37 Set Mirror Port
Syntax [no] destination <PORT>
Context Port Monitoring context
➞ 2015 Westermo Teleindustri AB 153