Westermo RedFox Series - Manual (Page 144)

Westermo OS Management Guide
Version 4.17.0-0
Usage Configure peer IP address for rescue-mode netconsole, e.g., ”rescue-peer
10.0.1.2”. This is used as the peer IP for rescue console. Defaults to ad-
dress 192.168.2.1.
This address is also used as default peer IP address when selecting TFTP
boot-image download (technology preview) within the boot-menu (at startup).
Use ”no rescue-peer” to reset local IP for rescue console to 192.168.2.1.
Use ”show rescue-peer” to show the configured address.
Default values 192.168.2.1
7.3.21 List Configuration and Log Files
Syntax dir [<cfg:// | log:// | usb://>]
Context Admin Exec
Usage List files in the configuration file directory, log file directory, or files on a
mounted USB memory. When listing configuration files you should be able
to see which of the present configuration files that is used as startup file. To
map a different configuration file as startup configuration, see the ”copy”
command (
section 7.3.22 ).
Default values cfg://
Example
example:/#> dir
==============================================================================
Contents of Config File System
==============================================================================
config0.cfg --> startup-config
config1.cfg
example:/#>
7.3.22 Copy, Store, Restore or Paste Files
Syntax copy <FROM_FILE> <TO_FILE>
Several methods are available to specify <FROM_FILE> and <TO_FILE>. Lo-
cal file access methods are listed below:
❼ Configuration files (default): ”cfg://<FILENAME>”
144 ➞ 2015 Westermo Teleindustri AB