3 managing vlan settings via the web interface, Section 13.3 – Westermo RedFox Series User Manual
Page 284
Westermo OS Management Guide
Version 4.17.0-0
13.3
Managing VLAN settings via the web interface
Menu path: Configuration ⇒ VLAN ⇒ VLANs
When entering the VLAN configuration page you will be presented to a list of all
VLANs configured on your switch, see below. Here you get an overview of the
settings for all VLANs and you can create or delete VLANs. The default VLAN
(VID 1) cannot be removed (see
). To change the settings for a
specific VLAN, click the edit icon which will take you to the VLAN settings edit
page.
VID
The VLAN’s unique identifier.
Name
The name of the VLAN. Automatically generated from VLAN
identifier when the VLAN is created using the web tool.
Enabled
Used to enable or disable a VLAN. Ports on a disabled VLAN
are temporarily moved to the system default VLAN. A green
check-mark means the VLAN is enabled, and a dash means it
is disabled.
Status
Current operational status of the VLAN, Up or Down.
Prio
VLAN priority setting. Values between 0-7 or disabled. See also
. Disabled is shown using a dash.
IGMP
In the VLAN overview table a green check-mark means that
IGMP snooping is enabled, and a dash means it is disabled, on
a specific VLAN. See
for more information.
Interface
A list of associated interfaces.
Continued on next page
284
➞ 2015 Westermo Teleindustri AB