Westermo RedFox Series - Manual (Page 572)

Westermo OS Management Guide
Version 4.17.0-0
system will use the system default route, or a matching network route, for
ping packets.
Default values Disabled (default gateway)
24.3.11 Configure Trigger Action
Syntax [no] action <INDEX>
Context Alarm Trigger Configuration context
Usage Specify the action (profile) to be invoked when this trigger detects an
alarm event.
Use ”no action” to disable the mapping to an alarm action. E.g., when
in use by another subsystem (e.g., VRRP with dynamic priority, see
sec-
tion 30.1.1 ), or if you simply want to temporarily disable or debug your
alarms.
Use command ”show action” to show the action profile mapped to this
trigger.
Default values 1 (default action)
24.3.12 Show Supported Trigger Types
Syntax show types
Context Alarm Configuration context
Usage List supported trigger types. These are the types to be used with the
”trigger <TYPE>” command (see section 24.3.2 ).
Default values Not applicable
24.3.13 Manage Alarm Actions
Syntax [no] action <INDEX>
Context Alarm Configuration context
572 ➞ 2015 Westermo Teleindustri AB